AVAILABLE SOON!

Aluminium Somni Water Table

Water tables are a great modern alternative to ponds where space is a consideration. Made from 3mm thick Aluminium our water tables require little maintenance and boast an advanced water circuit that helps to prevent blockages. The water is gently raised around 50mm above the surface before cascading over in a rill that surrounds the table. The LED light brook also adds drama and gives this feature another dimension after dark.

As standard, our Aluminium water tables can be made in any of our 8 RAL colours at no extra cost! All other RAL colours and any customisations are available with our bespoke service.

Please note: this product in not silent, it will produce sound from the both the cascading water and the pump.

PUMP/LED spout SOLD SEPERATELY as a kit.

As standard we can produce the Somni in the following RAL colours;

• 9016 PURE WHITE
• 7016 ANTHRACITE GREY 
• 9005 JET BLACK
• 5001 GREEN BLUE
• 1005 HONEY YELLOW 
• 6018 YELLOW GREEN 
• 3020 TRAFFIC RED  
• 2004 PURE ORANGE

For any other RAL colour prices are available on application.

Please note: this product is not silent, it will produce sound from the both the cascading, bubbling water and the running pump can be heard in certain circumstances.

Available Sizes:

600 x 600 x 700(H)mm (23kg) -with one LED bubbler/spout light. 3mm aluminium.

600 x 600 x 400(H)mm (17kg) -with one LED bubbler/spout light. 3mm aluminium.

800 x 800 x 400(H)mm (26kg) -with one LED bubbler/spout light. 3mm aluminium.

1000 x 1000 x 400(H)mm (36kg) -with one LED bubbler/spout light. 3mm aluminium.

1200 x 1200 x 400(H)mm (50kg) -with one LED bubbler/spout light. 3mm aluminium.

3000 x 1200 x 400(H)mm (88KG) -with three LED bubbler/spout lights. 4mm aluminium.

3000 x 1000 x 400(H)mm (79kg) -with three LED bubbler/spout lights. 4mm aluminium.

3000 x 800 x 400(H)mm (70kg) -with three LED bubbler/spout lights. 4mm aluminium.

4000 x 1000 x 400(H)mm (103kg) -with three LED bubbler/spout lights. 4mm aluminium.

Requirements:

A flat and level surface with no protruding points (like hardcore), sand or gravel is ideal and assists in levelling.

The power cables, 1x for the pump and one for the LED driver unit, exit the water tabel via the overflow pipe (underneath the water table) and are approximately 8m. You will need either a weatherproof dual socket with a safety cut-off or, the plugs can be cut-off and the power cables hard-wired into an RCD-type box - THIS IS ONLY FOR ADVSIORY PURPOSES, PLEASE CONSULT A QUALIFIED ELECTRICIAN FOR CORRECT AND LEGAL INSTALLATION. 

Power Requirements: LED driver Unit: Input 230V/50Hz 2W (12V DC output) - Single Spout WT Pump: 230V/50Hz 45W -  Multi Spout WT Pump: 230V/50Hz 400W.

• We do not currently hold stock of this item. To enquire about lead times please e-mail our sales team at sales@thepotco.com.
• All water features are supplied without a plug for the pump. The LED comes supplied with an EU plug driver unit ONLY.